1. It is recommended that you save your patches and bank as FXB or FXP files, By doing this the sketch pad will remember all settings in your patches.




2. Q = Why do I experience hanging notes during patch change?
A = If you dont release all held keys on the keyboard before patch change there will be no note off messages transmitted to the previous patch and the notes will therefore end up being constantly held. One way to solve this problem with stuck notes is to retrigger them once again. This is a frustrating bug in the sketch pad I havent been able to solve yet.



	
3. Q = When I play the sketch pad some notes in the chord sometimes go missing. Why does that happen?
A = The chord section is meant to be played monophonic. If you press down a key on your keyboard while not having released the previous one some interference may happen wich result in this.



There are unfortunately some issues with the midi channel output in some DAWs.

4. When recording chords to external instruments in Cubase SX3 all midi seem to respond to the external instruments even though the track is set to only respond from individual channels. It work well if the external instrument itself contain a midi channel filter so that you can filter out the fund and chord channel if you for example only intend to use the solo midi.



5. When you use the sketch pads midi out in Cockos Reaper to control other instruments, never transmit with the midi channel out set to 1 or all. This goes both for the settings inside of the sketch pad and the settings inside the track routings send/receive page.

If the midi is set to 1 or all you may experience stuck or hanging notes.



6. Q = Can i load my own soundfonts in the major sketch pad?
A = See page 8 in the manual.




7. Q = "There seems to be a glitch when I try to change patch on the sketch pad inside my digital audio workstation, sometimes it doesn't seem to change patch at all. Why is this?"
A = This is also a bug in the sketch pad. Use the "prev" and "next" pads on the sketch pad interface if you want to change patches without issues. Or apply a midi controller to them and change patches with external equipment.


CONTACT = www.2storstark.com/afdarhus

BEST REGARDS
//Af Kreativt Darhus
